For 1990-2009 cars only
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Ignition ON/Engine OFF | |||
Electronics Battery Fd | Data | Volts | 12.6 Volts |
Load Shed | Inputs | None/Load 1//Load 2/Load 3 | None |
Inadvertent Power Relay | Outputs | On/Off | Off |
Load Management Relay | Outputs | On/Off | Off |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Ignition ON/Engine OFF | |||
Crank Request Signal | Engine Data 2 | Yes/No | No |
GEN F-Terminal Signal | Engine Data 2 | % | 0% |
GEN L-Terminal Signal Command | Engine Data 2 | On/Off | Off |
Ignition 1 Signal | Engine Data 1 | Volts | 12.6 Volts |
Starter Enable Relay Circuit Status | Output Driver Data | Fault/OK/Invalid State | OK |
Starter Relay Command | Engine Data 2 | On/Off | Off |
