Instrument Panel Compartment Door Latch Release Handle Replacement Aztek

1. Open the instrument panel (I/P) compartment door assembly.
2. Remove the screws retaining the I/P compartment door latch to the door.
3. Remove the door handle.

1. Install the door handle into position in the I/P compartment door.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the I/P compartment door latch retaining screws.

Tighten
Tighten the IP compartment door latch retaining screws to 2 N·m (18 lb in).

3. Close the I/P compartment door assembly.

Instrument Panel Compartment Door Latch Release Handle Replacement Rendezvous

1. Open the door to the instrument panel (I/P) compartment.
2. Lightly squeeze the edges of the door handle and the latch cover to release the retaining tabs. Remove the cover from the inside of the I/P compartment door.



3. Remove the retaining clip which secures the latch to the I/P compartment door.
4. Begin to lift the door latch away from the door, slide the latch to the right, then disconnect the latch rod from the door handle.
5. Remove the door latch.
6. Using a flat-bladed tool, remove the retainer from the I/P compartment door handle.
7. Remove the door handle.

1. Install the door handle into the I/P compartment door.
2. Install and fully seat the retainer to the door handle.
3. Connect the door latch rod to the door handle. Lower the door latch into position on the door.



4. Align the door handle and the latch cover to the I/P compartment door. Carefully press the cover into place to secure the retaining tabs.
5. Close the I/P compartment door.