GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Pontiac
🢒
2002
🢒
Aztek - AWD
🢒
Body and Accessories
🢒
Theft Deterrent
🢒 Theft Deterrent Module Replacement
Removal Procedure
Disable the SIR. Refer to
Disabling the SIR System
in SIR.
Remove the trim covers. Refer to
Steering Column Trim Covers Replacement - On Vehicle
.
Remove the theft deterrent module wiring harness from the steering column harness.
Disconnect the electrical connector.
Pull the theft deterrent module (2) away from the lock cylinder housing (1).
Installation Procedure
Push the theft deterrent module (2), onto the lock cylinder housing (1) .
Install the theft deterrent wiring harness to the steering column harness.
Connect the electrical connector.
Replace the steering column trim covers. Refer to
Steering Column Trim Covers Replacement - On Vehicle
.
Enable the SIR system. Refer to
Enabling the SIR System
.
Program the new theft control moduel. Refer to
Programming Theft Deterrent System Components