Front Bumper Fascia Energy Absorber Replacement Aztek

Tools Required

J 38778 Door Trim Pad and Garnish Clip Remover

1. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement .
2. Remove the push-in retainers from the front bumper energy absorber using J 38778 .



3. Remove the front bumper energy absorber from the front bumper impact bar.

1. Position the front bumper energy absorber to the front bumper impact bar.



2. Starting with the center hole, install the push-in retainers to the front bumper energy absorber.
3. Install the front bumper fascia. Refer to Front Bumper Fascia Replacement .

Front Bumper Fascia Energy Absorber Replacement Rendezvous

Tools Required

J 38778 Door Trim Pad and Garnish Clip Remover

1. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement .
2. Remove the push-in retainers from the front bumper energy absorber using J 38778 .
3. Remove the front bumper energy absorber from the front bumper impact bar.

1. Position the front bumper energy absorber to the front bumper impact bar.
2. Starting with the center hole, install the push-in retainers to the front bumper energy absorber.
3. Install the front bumper fascia. Refer to Front Bumper Fascia Replacement .