Removal Procedure
- Remove the sunroof glass panel from the sunroof module. Refer
to
Sunroof Glass Panel Replacement
.
- Fully close the sunshade.
- From the top of the vehicle, use your
thumbs to push the sunshade retainers towards the center of the vehicle.
- Lift upward and slightly forward on the
sunshade to clear the rear brace.
- Remove the sunshade from the sunroof module.
Installation procedure
- From the outside of the vehicle, install
the front of one side of the sunshade retainers into the sunshade track.
- Lower the sunshade to clear the rear brace then install the rear
retainer into the track.
- While pushing in the sunshade retainers
push down and position the opposite side retainers into sunshade track.
- Inspect the sunshade for proper operation.
- Install the sunroof glass panel. Refer to
Sunroof Glass Panel Replacement
.