LOOSE OR MISSING WHEEL COVERS (NEW RETENTION SYSTEM & P/N)

P02 WHEEL COVERS

Models Affected 1986-88 PONTIAC 6000 AND 6000 LE MODELS --------------- This bulletin combines and supersedes bulletin 86-3-14 issued 9/86 and 87/3-21 issued 1O/87. Please remove them from your files.

Covers on vehicles produced after January 1, 1988 have a new 9-point retention system. From the front side, the covers are identical and can be used on 1986-88 vehicles.

VIN - Tarrytown - JT 218384

Oshawa - J9 285870

Vehicles produced prior to July 1987 may experience missing and/orloose wheel covers. Loose or missing wheel covers should be repaired as follows:

MISSING COVERS - Replace missing covers and replace clips on remaining covers with new retention clips (3 per cover).

*LOOSE COVER - If a customer has one loose cover, replace the clips on all 4 covers.

** Refer to Illustration for installation procedure.

Covers on vehicles produced after July 1, 1987 and before January 1,1988, will have new clips.

Part Part Description Number ----------- ------ Revised Clip 10055200 (3 per cover)

Gray Cover 10091722 *

Beechwood (Copper) cover 10091723

Sapphire (Blue) Cover 10091724

White Cover 10091725

* Gray is the only cover released for 1986 and 1987.

WARRANTY INFORMATION: Use existing labor operation and time for warranty purposes.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.