GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Opel 🢒 2007 🢒 GT 🢒 Engine 🢒 Engine Mechanical - 2.0L 🢒 Intake Manifold Installation

    Object Number: 1769718 Size: SH
  1. Install a NEW intake manifold gasket.
  2. Install the intake manifold.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the intake manifold bolts and nuts.

    4. Tighten

    1. Tighten the intake manifold bolts to 22 N·m (16 lb ft).
    2. Tighten the intake manifold nuts to 22 N·m (16 lb ft).

    Object Number: 1769715 Size: SH
  4. Install the intake manifold brace.
  5. Install the intake manifold brace bolt.

    6. Tighten
    Tighten the intake manifold brace bolt to 22 N·m (16 lb ft).


    Object Number: 1769711 Size: SH
  6. Connect the rear knock sensor to the intake manifold brace.
  7. Install the vacuum pump bracket.
  8. Install the vacuum pump bracket bolt and nut.

    9. Tighten
    Tighten the vacuum pump bracket bolt and nut to 22 N·m (16 lb in).


    Object Number: 1846062 Size: SH
  9. Install the vacuum pump.
  10. Install the vacuum pump bolts.

    11. Tighten
    Tighten the vacuum pump bolts to 10 N·m (89 lb in).


    Object Number: 1769706 Size: SH
  11. Install the throttle body.
  12. Install the throttle body bolts.

    13. Tighten
    Tighten the throttle body bolts to 10 N·m (89 lb in).


    Object Number: 1769666 Size: SH
  13. Install the high pressure fuel pump noise insulator.
  14. Install the high pressure fuel pump cover.
  15. Install the high pressure fuel pump cover bolts.

    16. Tighten
    Tighten the fuel pump cover bolts to 10 N·m (89 lb in).


    Object Number: 1769663 Size: SH
  16. Lubricate the high pressure fuel pump fuel feed line connection threads with clean 5W30 engine oil.
  17. Install the fuel feed line.
  18. Install the fuel feed line bolts.
  19. Connect the low pressure fuel line nut.

    20. Tighten

    1. Tighten the low pressure fuel line nut to 30 N·m (22 lb ft).
    2. Tighten the fuel feed line bolts to 10 N·m (89 lb in).

    Object Number: 1769657 Size: SH
  20. Install the bypass valve solenoid with hoses.
  21. Install the bypass valve solenoid bolts.

    22. Tighten
    Tighten the bypass valve solenoid bolts to 10 N·m (89 lb in).

  22. Connect the bypass valve solenoid hoses and clamps.