Was the entire Cruise Control System Check performed?

--

Go to Step 2

Go to Cruise Control System Check

1. Turn the ignition switch to the RUN position.
2. Turn the cruise control switch to the ON position.
3. Using a test light, backprobe connector C201, at the base of the steering column, from terminal A15 to ground.
4. Press and hold the RESUME/ACCEL switch.

Does the test light illuminate?

--

Go to Step 3

Go to Step 4

1. Test for an open in CKT 87, between connector C201 and the cruise control module.
2. Test for a poor connection at the cruise control module terminal C.
3. If the connection is OK, replace the cruise control module. Refer to Cruise Control Module Replacement .

Is the repair complete?

--

Go to Step 5

--

1. Test for one of the following conditions in CKT 87, in the steering column:

•

An open

•	A short to ground

2. Test for a poor connection at connector C201 terminal A15.
3. If the connection is OK, replace the cruise control switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle in Steering Wheel and Column-Tilt.

Is the repair complete?

--

Go to Step 5

--

1. Turn the ignition switch to the OFF position.
2. Reconnect all connectors components removed.

Have all the repairs been made?

--

Go to Cruise Control System Check

--