Step | Action | Value(s) | Yes | No | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 |
Are all display segments lit for 2 seconds then off for 2 seconds? | -- | Go to Step 2 | |||||||||
2 | The driver information display will then automatically test internal circuitry. Does the display show PS for approximately 2 seconds? | -- | Go to Step 4 | Go to Step 3 | ||||||||
3 | Listed below are the error codes that can occur with the driver information display. If any of these codes exist, replace the driver information display. Refer to Driver Information Center Replacement .
Has the repair been made and the system rechecked? | -- | System OK | -- | ||||||||
4 | The driver information display will then show the variation number in the temperature portion of the display along with the VAR indicator turned ON for approximately 2 seconds. Does the display show the variation number [see value(s) column] in the temperature portion of the display? | 1 - 15 | Go to Step 5 | Go to Step 7 | ||||||||
5 | The driver information display will then show SW (Software Revision Level) followed by the number corresponding to that software revision level for approximately 2 seconds. Does the display show the Software Revision Level number in the temperature portion of the display? | -- | Go to Step 6 | Go to Step 7 | ||||||||
6 |
Has the Self-Test completed all of the circuit diagnostic tests? | -- | System OK | -- | ||||||||
7 | Replace the driver information display. Refer to Driver Information Center Replacement . Has the repair been made and the system rechecked? | -- | System OK | -- |
