For 1990-2009 cars only
Removal Procedure
- Insert a small, flat-bladed tool between the switch block/reading lamp housing and the overhead console.
- Press inward and down in order to release the switch block/reading lamp housing from the overhead console.
- Use a small, flat-bladed tool to push one of the tabs on the reading lamp socket to release the socket from the housing.
- Remove the reading lamp socket from the housing.
- Pull the bulb from the socket.
Installation Procedure
- Press the bulb into the bulb socket.
- Push the lamp socket into the housing.
- Align the forward tab on the switch block/reading lamp housing into the slot in the front of the overhead console.
- Align the rear locking tabs to the overhead console.
- Press up on the switch block/reading lamp housing in order to snap them into the trim ring.
