Turn the ignition switch to the RUN position.

Is the SERVICE ENGINE SOON indicator on?

--

Go to Step 2

Go to Instrument Cluster Indicators and Gauges Inoperative

1. Disconnect the engine oil pressure indicator switch connector.
2. Connect a (3 amp) fused jumper between the engine oil pressure indicator switch connector terminal A and ground.
3. Turn the ignition switch to the RUN position.

Is the Oil Pressure warning indicator on?

--

Go to Step 3

Go to Step 4

1. Check for a poor connection at the engine oil pressure indicator switch connector.
2. If OK, replace the engine oil pressure switch. Refer to Engine Oil Pressure Sensor and/or Switch Replacement in Engine Mechanical.

Has the repair been made and the system rechecked?

--

System OK

--

Check for a poor connection or open in circuit 31 between the instrument cluster harness connector C1 terminal A and the engine oil pressure indicator switch harness connector terminal A.

Is there a poor connection or open in circuit 31?

--

Go to Step 5

Go to Step 6

Repair the poor connection or open in circuit 31.

Has the repair been made and the system rechecked?

--

System OK

--

1. Check the oil pressure warning indicator bulb and bulb connection.
2. If OK, replace the instrument cluster. Refer to Instrument Cluster Replacement .

Has the repair been made and the system rechecked?

--

System OK

--