Circuit Description
DTC C1286 is an information only DTC. DTC C1286 reflects the status of the command the EBCM/EBTCM issues to illuminate the red BRAKE warning indicator. If another DTC issues a command to illuminate the red BRAKE warning indicator, the EEPROM will store DTC C1286 as a history DTC at the conclusion of the ignition cycle.
Diagnostic Aids
The following ABS mechanical DTCs command the red BRAKE warning indicator to illuminate. The DTCs will also cause EEPROM to store DTC C1286 during shutdown:
| • | C1238 |
| • | C1241 |
| • | C1242 |
| • | C1246 |
| • | C1251 |
If the motors are not in their home position the following electrical DTCs will also command the red BRAKE warning indicator on:
| • | C1214 |
| • | C1216 |
| • | C1218 |
| • | C1255 |
| • | C1256 |
| • | C1257 |
| • | C1258 |
| • | C1261 |
| • | C1262 |
| • | C1263 |
| • | C1264 |
| • | C1265 |
| • | C1266 |
| • | C1344 |
| • | C1345 |
If any of the electrical DTCs are indicated along with DTC C1286, correct the electrical DTCs prior to addressing a DTC C1286 malfunction.
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the Diagnostic System Check performed? | -- | Go to Diagnostic System Check | |
2 |
Are any other DTCs set with DTC C1286 as a current and or History DTC? | -- | ||
3 | Use the scan tool in order to clear DTC C1286. Was DTC C1286 cleared? | -- | Go to Diagnostic System Check | |
4 | Replace the EBCM/EBTCM. Refer to Electronic Brake and Traction Control Module Replacement . Is the repair complete? | -- | Go to Diagnostic System Check | -- |
