- Remove the upper and lower trim covers. Refer to
Steering Column Trim Covers - Disassemble - Off Vehicle
.
- Pop the wire harness assembly (4)
out of the wire harness strap (5).
- Remove the wire harness straps (3) from the wire harness
assembly (4).
- Remove 1 wire harness strap (2) from the upper tilt
head assembly (1).
- Slide the turn signal
switch assembly connectors (2) out from the bulk head connector (1).
- Remove the key alarm connector (1)
from the lock module assembly (2).
- Remove the 2 tapping screws from the ignition key alarm
switch assembly (3).