Tools Required

J 38778 Door Trim Pad and Garnish Clip Removal

1. Open the power sliding door.
2. Use the J 38778 in order to unsnap the door mounted plunger push-in retainers from the sliding door.



3. Remove the door mounted plungers from the sliding door.



4. Disconnect the electrical connector from the door mounted plungers.

1. Connect the electrical connector to the door mounted plungers.



2. Install the door mounted plungers to the sliding door.
3. Install the push-in retainers in order to secure the door mounted plungers to the sliding door.
4. Close the power sliding door.