Removal Procedure
- Remove the sliding door center roller bracket (body side). Refer to Center Track Cover Bracket Replace - Sliding Door .
- Remove the rear quarter lower trim panel. Refer to Rear Quarter Lower Trim Panel Replacement .
- Remove the sliding door center track screws.
- Remove the sliding door center track screw or stud from the front of the track inside the vehicle.
- Remove the sliding door center track from the vehicle.
Installation Procedure
- Install the sliding door center track to the vehicle.
- Install the sliding door center track screw or stud to the front of the track inside the vehicle.
- Install the sliding door center track screws.
- Install the rear quarter lower trim panel. Refer to Rear Quarter Lower Trim Panel Replacement .
- Install the sliding door center track bracket. Refer to Center Track Cover Bracket Replace - Sliding Door .
- Lubricate the front radius of the center track (extended wheelbase only). Refer to Fluid and Lubricant Recommendations .
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the sliding door center track screw or stud to 10 N·m
(89 lb in).
Tighten
Tighten the sliding door center track screws to 10 N·m
(89 lb in).
