Step
| Action
| Value(s)
| Yes
| No
|
1
| Was the entire outside mirrors system check performed?
| --
|
Go to Step 2
| Go to
Outside Mirrors System Check
|
2
|
- Use the mirror select switch to select the inoperative mirror.
- If the left mirror is inoperative, backprobe with a test light
from the outside rearview mirror remote control switch connector terminal F
to terminal H.
- If the right mirror is inoperative, backprobe with a test light
from the outside rearview mirror remote control switch connector terminal B
to terminal C.
- While observing the test light, press the mirror position switch
to the LEFT position.
Does the test light illuminate?
| --
|
Go to Step
3
|
Go to Step 4
|
3
|
- Using a test light, backprobe from the inoperative outside rearview
mirror connector terminal B to terminal A.
- Press the mirror position switch to the LEFT position while observing
the test light.
Does the test light illuminate?
| --
|
Go to Step
5
|
Go to Step 6
|
4
| Replace the outside rearview mirror remote control switch. Refer to
Door Trim Plate Replacement
.
Is the repair complete?
| --
|
Go to Step
7
| --
|
5
| Replace the mirror motor pack within the power mirror. Refer to
Outside Rearview Mirror Motor Replacement
.
Is the repair complete?
| --
|
Go to Step
7
| --
|
6
|
- If the left mirror is inoperative repair the open in circuit 81.
- If the right mirror is inoperative repair the open in circuit 881.
Is the repair complete?
| --
|
Go to Step
7
| --
|
7
|
- Turn the ignition switch to the OFF position.
- Reconnect all connectors/components removed.
Have all the repairs been made?
| --
| Go to
Outside Mirrors System Check
| --
|
