Step
| Action
| Value(s)
| Yes
| No
|
1
| Is the CD player mute or skipping?
| --
| Go to
Step 3
| Go to
Step 2
|
2
| Does the letter E followed by 2 numbers (E##) appear in the radio
display?
| --
| Go to
Step 3
| Go to
Step 5
|
3
|
- Inspect the CD player for the following conditions:
| • | The disc is inserted upside down. |
| • | The disc is scratched or dirty. |
| • | The disc is moist or wet. |
| • | The disc may be moist if a cold disc was inserted into a hot player,
or vice versa. |
| • | The internal temperature of the IP is high. |
| • | A very high internal temperature may cause the disc to eject. |
- Wait for 1 hour in order to allow the moisture to evaporate.
- Use a known good disc in order to test the operation of the CD
player.
Is the CD player operating correctly?
| --
| System OK
| Go to
Step 4
|
4
|
| • | Verify that the disc is inserted correctly. |
| • | Clean any dirt or fingerprints from the disc. |
| | Allow one hour for condensation to evaporate. |
| • | Duplicate the road operating conditions with a known good disc
(skipping may be normal on rough or dirt roads). |
| • | Attempt to duplicate other conditions with a known good disc.
Some discs may contain marks that are not visible. |
Is the CD player operating correctly?
| --
| System OK
| Go to
Step 5
|
5
| Service the CD player. Refer to
Compact Disc Care and Cleaning
.
Is the symptom still present?
| --
| --
| System OK
|
