Step | Action | Value(s) | Yes | No | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | Was the Hydraulic Brake Diagnostic System Check performed? | -- | Go to Step 2 | |||||||||||
2 | Inspect the brake linings for the following:
Refer to Brake Pad Inspection in Disc Brakes and Brake Shoe Inspection in Drum Brakes. Do any of the above conditions exist? | -- | Go to Step 3 | Go to Step 4 | ||||||||||
3 | Replace the brake linings as necessary. Refer to the applicable procedures.
Is the repair complete? | -- | -- | |||||||||||
4 | Inspect the brake rotors for the following
Refer to Brake Rotor Lateral Runout Check . Do any of the above conditions exist? | -- | Go to Step 5 | Go to Step 6 | ||||||||||
5 | Resurface or replace the brake rotor as necessary. Refer to Brake Rotor Refinishing , Front Brake Rotor Replacement or Rear Brake Rotor Replacement in Disc Brakes. Is the repair complete? | -- | -- | |||||||||||
6 | Inspect brake assembly for loose, broken, or missing components. Refer to Brake Pad Inspection in Disc Brakes and Brake Shoe Inspection in Drum Brakes. Are there any loose, broken, or missing brake assembly components? | -- | Go to Step 7 | Go to Step 8 | ||||||||||
7 | Repair or replace the components as necessary. Is the repair complete? | -- | -- | |||||||||||
8 | Verify proper brake system operation. Does the original condition still exist? | -- | Go to Step 1 | System OK |
