SMU - SECTION 8A MFC CONTROL MODULE PINOUT TEST

SUBJECT: MULTI-FUNCTION CHIME (MFC) CONTROL MODULE PINOUT TEST

MODELS/YEARS: 1991-93 NINETY EIGHT AND 1992-93 EIGHTY EIGHT

Diagnosis for Test A "MULTI-FUNCTION CHIME (MFC) CONTROL MODULE PINOUT TEST" found in following service manuals has been revised to avoid any confusion and misdiagnosis.

1991-92 Oldsmobile Ninety Eight, Page 8A-77-04 1992 Oldsmobile Eighty Eight, Page 8A-77-04 1993 Oldsmobile Eighty Eight/Ninety Eight, Page 8A-77-06

The Text States:

FUEL LEVEL SENDER INPUT, LESS THAN 3 OHMS WITH FUEL TANK EMPTY; MORE THAN 80 OHMS WITH FUEL TANK FULL, IF NOT, REFER TO SECTION 8A-80.

Should Be Replaced With:

ENGINE RUNNING INPUT FUEL LEVEL SENDER INPUT, LESS THAN 3 OHMS WITH FUEL TANK EMPTY; MORE THAN 80 OHMS WITH FUEL TANK FULL, IF NOT, REFER TO SECTION 8A-80.

Please make changes to your copy of the service manual.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.