FRT. SEAT CENTER ARMREST ANGLE TOO GREAT-NEW PROC. TO ADJUST

SUBJECT: FRONT SEAT CENTER ARMREST ANGLE - NEW PROCEDURE TO ADJUST

MODELS/YEARS: 1992 EIGHTY EIGHT AND NINETY EIGHT

CONDITION: On some 1992 Eighty Eight and Ninety Eight vehicles, the armrest angle may be too great for proper use.

CORRECTION: This condition can be corrected as follows:

1. Remove the front seat assembly.

2. Remove the center armrest.

3. Use two standard 1/4" washers as shims on each rear armrest attaching stud to level the armrest. See the illustration.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.