Tail Lamp Replacement Buick

1. Remove the rear compartment sill panel trim. Refer to Rear Compartment Sill Trim Plate Replacement .



2. Remove the nuts (1) that retain the taillamp (2).
3. Disconnect the lamp harness electrical connector.
4. Remove the taillamp (2).

1. Install the taillamp (2).
2. Connect the lamp harness electrical connector.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

Important: Do not rework or alter the reflective surface of the taillamps (2).

3. Install the nuts (1) in order to retain the taillamp (2).

Tighten
Tighten the nuts (1) to 6 N·m (53 lb in).

4. Install the rear compartment sill panel trim. Refer to Rear Compartment Sill Trim Plate Replacement .

Tail Lamp Replacement Oldsmobile

1. Remove the rear compartment trim. Refer to Rear Compartment Trim Panel Replacement .



2. Remove the nuts (3) that retain the taillamp (1).
3. Disconnect the connector (2).
4. Remove the taillamp (1).

1. Install the taillamp (1).
2. Connect the connector (2) to the taillamp (1).

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

Important: Do not rework or alter the reflective surface of the taillamps (1).

3. Install the nuts (3) in order to retain the taillamp (1).

Tighten
Tighten the nuts (3) to 5 N·m (44 lb in). Tighten the nuts in the proper sequence shown in the illustration.

4. Install the rear compartment trim. Refer to Rear Compartment Trim Panel Replacement .

Tail Lamp Replacement Pontiac

1. Remove the rear compartment sill panel trim. Refer to Rear Compartment Sill Trim Plate Replacement .



2. Remove the nuts (4) that retain the taillamp (1).
3. Disconnect the lamp harness connector (3).
4. Remove the taillamp (1).

1. Install the taillamp (1).
2. Connect the lamp harness connector (3).

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

Important: Do not rework or alter the reflective surface of the taillamps (1).




3. Install the nuts in order to retain the taillamp.

Tighten
Tighten the nuts  to 5 N·m (44 lb in). Tighten the nuts in the sequence shown in the illustration.

4. Install the rear compartment sill panel trim. Refer to Rear Compartment Sill Trim Plate Replacement .