LOOSE SWITCH PLATES ON DOOR TRIM PANELS

SUBJECT: LOOSE SWITCH PLATES ON DOOR TRIM PANELS (BEND RETAINING CLIP OPEN)

MODELS: 1998 OLDSMOBILE INTRIGUE

CONDITION:

SOME OWNERS MAY COMMENT THAT THE SWITCH TRIM PLATE MOUNTED ON THE DOOR TRIM PANEL IS LOOSE.

CORRECTION:

REMOVE THE SWITCH TRIM PLATE AND CAREFULLY BEND THE RETAINING CLIP OPEN TO CREATE MORE INTERFERENCE WITH THE TRIM PANEL. SEE FIGURE 1.

DO NOT REPLACE THE SWITCH TRIM PLATES FOR THIS CONDITION.

WARRANTY INFORMATION:

FOR VEHICLES REPAIRED UNDER WARRANTY, USE:

LABOR OPERATION NUMBERS: C3300, C3301, C3480, AND C3481 USE PUBLISHED LABOR OPERATION TIME.

FIGURES: 01 ATTACHMENTS: 00

FIGURE 1 - SWITCH TRIM PLATE

GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.

COPYRIGHT 1997 GENERAL MOTORS CORPORATION. ALL RIGHTS RESERVED.