GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 1998 🢒 Intrigue 🢒 Body and Accessories 🢒 Body Front End 🢒 Plenum Water Deflector Replacement

Removal Procedure

    Object Number: 183044 Size: SH
  1. Open the hood.
  2. Remove the air inlet grille. Refer to Air Inlet Grille Panel Replacement .
  3. Pull the plenum chamber deflector from the windshield lower frame.

    4. Object Number: 182968 Size: SH
  4. Remove the plenum chamber deflector extension, if necessary.

Installation Procedure

    Object Number: 182968 Size: SH
  1. Insert the tabs of the extension over the flange of the plenum chamber and press down until fully seated.

    2. Object Number: 183044 Size: SH
  2. Install the plenum chamber deflector to the flange.
  3. Start at the centerline of the vehicle and work toward the passenger side corner.
  4. Install the air inlet grille. Refer to Air Inlet Grille Panel Replacement .
  5. Close the hood.