| Table 1: | Remote Unlock Verification |
| Table 2: | Remote Lock Verification |
Mode | Description |
|---|---|
Mode 1 | Feature disabled. No headlamps flash nor horn sounds when unlocking doors using the keyless entry transmitter. |
Mode 2 | Horn sounds when pressing unlock on the keyless entry transmitter. |
Mode 3 | Headlamps flash when pressing unlock on the keyless entry transmitter. |
Mode 4 | Headlamps flash and horn sounds when pressing unlock on the keyless entry transmitter. |
Changing the Remote Unlock Verification Mode
Two ways to change the remote unlock verification mode:
| • | Scan tool method. Refer to scan tool user's manual for more information. |
| • | Without a scan tool, describe next: |
- Close all vehicle doors.
- Turn the ignition switch on.
- Press and hold unlock on either door lock switch.
- While holding unlock on the door lock switch, press and release unlock on the keyless entry transmitter.
- To advance the mode: Press and release unlock again on the keyless entry transmitter.
Note: The BCM sounds the chime a number of times equal to the current remote unlock verification mode.
| • | The BCM sounds the chime a number of times equivalent to the remote unlock verification mode. A transition past mode 4 repeats the sequence starting with mode 1. |
| • | To exit and save the current customization mode: Release the door lock switch when obtaining desired mode. |
If unable to change modes refer to Body Control Module Diagnostic Information in Body Control System for diagnosis and repair.
Mode | Description |
|---|---|
Mode 1 | Feature disabled. No headlamps flash nor horn sounds when locking doors using the keyless entry transmitter. |
Mode 2 | Horn sounds when pressing lock on the keyless entry transmitter. |
Mode 3 | Headlamps flash when pressing lock on the keyless entry transmitter. |
Mode 4 | Headlamps flash and horn sounds when pressing lock on the keyless entry transmitter. |
Changing the Remote Lock Verification Mode
Two ways to change the remote lock verification mode:
| • | Scan tool method. Refer to scan tool user's manual for more information. |
| • | Without a scan tool, describe next: |
- Close all vehicle doors.
- Turn the ignition switch on.
- Press and hold lock on either door lock switch.
- While holding lock on the door lock switch, press and release lock on the keyless entry transmitter.
- To advance the mode: Press and release lock again on the keyless entry transmitter.
The BCM sounds the chime a number of times equal to the current remote unlock verification mode.
| • | The BCM sounds the chime a number of times equivalent to the remote lock verification mode. A transition past mode 4 repeats the sequence starting with mode 1. |
| • | To exit and save the current customization mode: Release the door lock switch when obtaining desired mode. |
If unable to change modes refer to Body Control Module Diagnostic Information in Body Control System for diagnosis and repair.
