GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 1998 🢒 Intrigue 🢒 Body and Accessories 🢒 Instrument Panel, Gauges, and Console 🢒 Hood Release Lever Replacement

Removal Procedure

    Object Number: 182644 Size: SH
  1. Remove the LH instrument panel (IP) insulator. Refer to Instrument Panel Insulator Replacement .
  2. Remove the steering column opening filler panel. Refer to Steering Column Opening Filler Replacement .
  3. Remove the bolts retaining the base of the hood release handle.

    4. Object Number: 182641 Size: SH
  4. Release and remove the hood release cable from the hood release handle.
  5. Remove the hood release handle.

Installation Procedure

    Object Number: 182641 Size: SH
  1. Install the hood release cable to the hood release handle.

    2. Object Number: 182644 Size: SH
  2. Position the hood release handle to the IP trim pad.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the hood release handle retaining bolts.

    4. Tighten
    Tighten the hood release handle retaining bolts to 2 N·m (18 lb in).

  4. Install the steering column opening filler panel. Refer to Steering Column Opening Filler Replacement .
  5. Install the LH IP insulator. Refer to Instrument Panel Insulator Replacement .