Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the Washer/Wiper System Check performed? | -- | Go to Step 2 | |
2 |
Is the test light on? | -- | Go to Step 3 | Go to Step 6 |
3 | Check for poor connection to the washer pump. Is a poor connection present? | -- | Go to Step 5 | Go to Step 4 |
4 | Replace the washer pump. Refer to Washer Pump Replacement . Is the replacement complete? | -- | -- | |
5 | Repair the poor connection condition. Is the repair complete? | -- | -- | |
6 | Connect the J 35616-200 between the washer pump connector, terminal A, and ground. Is the test light on? | -- | Go to Step 7 | Go to Step 8 |
7 | Repair the open circuit in CKT 1250. Is the repair complete? | -- | -- | |
8 | Connect the J 35616-200 between the wiper/washer switch connector C203, terminal E, and ground. Is the test light on? | -- | Go to Step 9 | Go to Step 11 |
9 | Check for an open circuit in CKT 228. Is an open circuit present? | -- | Go to Step 10 | Go to Step 13 |
10 | Repair the open circuit in CKT 228. Is the repair complete? | -- | -- | |
11 | Check for poor connection at connector C203 terminal E. Is an poor connection present? | -- | Go to Step 12 | Go to Step 13 |
12 | Repair the poor connection at connector C203 terminal E. Is the repair complete? | -- | -- | |
13 | Replace the wiper/washer switch. Refer to Turn Signal and Multifunction Switch Assembly - Off Vehicle . Is the replacement complete? | -- | -- |
