Tools Required

J 38778 Door Trim Pad and Garnish Clip Remover

1. Remove the front fender liners. Refer to Front Fender Liner Replacement in Body Frond End.



2. Remove the bolts from the front bumper fascia at fender.



3. Remove the push-in retainers from the front bumper fascia lower support at the front impact bar using J 38778 .



4. Remove the bolts from the front bumper fascia lower bumper support at the front bumper impact bar.
5. Remove the front bumper fascia air baffle. Refer to Radiator Air Baffle Assemblies and Deflectors in Engine Cooling.



6. Remove the push-in retainers from front bumper fascia upper support using the J 38778 .



7. Remove the bolts from the front bumper fascia upper support.



8. Remove the front bumper fascia from the vehicle.



9. Remove the retainer tab.

Rotate the retainer tab counterclockwise.

1. Align the front bumper fascia to vehicle.
2. Position the front bumper fascia retainer to opening in fender reinforcement.



3. Rotate the retainer until tab is secured into hole.

Rotate the retainer tab clockwise.




4. Install the bolts to the front bumper fascia at fender.

Tighten
Tighten the front bumper fascia to fender bolts to 5 N·m (44 lb in).




5. Install the push-in retainers to the front bumper fascia upper support.



6. Install the bolts to the front bumper fascia upper support.

Tighten
Tighten the front bumper fascia to upper support bolts to 2 N·m (18 lb in).

7. Install the front bumper fascia air baffle. Refer to Radiator Air Baffle Assemblies and Deflectors in Engine Cooling.



8. Install the push-in retainers to the front bumper fascia lower support at the lower impact bar.



9. Install the bolts to the front bumper fascia lower bumper support at the front bumper impact bar.

Tighten
Tighten the front bumper fascia lower support bolts to 2 N·m(18 lb in).

10. Install the front fender liners. Refer to Front Fender Liner Replacement in Body Front End.