Removal Procedure
- Open the rear compartment lid.
- Remove the rear compartment convenience net, if equipped, from
the plastic wingnut retainers.
- Remove the visible plastic wingnut retaining
the taillamp.
- Pull back the corner of the rear compartment trim panel to access
the remaining plastic wingnuts.
- Apply light pressure to the taillamp lens to retain the lamp in
position during removal of the remaining plastic wingnut retainers.
- Remove the remaining plastic wingnuts retaining the taillamp.
- Disconnect the electrical connector from the taillamp assembly,
if replacing the lamp assembly.
- Carefully remove the taillamp assembly from the rear body panel
and support the taillamp assembly.
- Release the taillamp assembly wiring harness from the rear body
panel, if replacing the lamp assembly.
- Rotate the taillamp socket counterclockwise to release from the
taillamp assembly, if replacing a taillamp bulb.
- Remove the bulb from the socket, if replacing a taillamp bulb.
Installation Procedure
- Install the bulb to the socket, if removed.
- Install the taillamp socket to the taillamp assembly, if removed,
then rotate the lamp socket clockwise to secure.
- Install and secure the taillamp assembly wiring harness to the
rear body panel, if removed.
- Carefully align and install the taillamp assembly to the rear
body panel.
- Apply light pressure to the lens to retain the lamp in position
during installation of the plastic wingnut retainers.
- Connect the electrical connector to the taillamp assembly, if
disconnected.
- Install the taillamp assembly plastic wingnut retainers, which
will be hidden by the rear compartment trim panel.
- Install the corner of the rear compartment trim panel into position.
- Install the taillamp remaining plastic wingnut retainer.
- Install the rear compartment convenience
net, if equipped, to the plastic wingnut retainers.
- Close the rear compartment lid.