Step
| Action
| Value(s)
| Yes
| No
|
1
|
- Check the suspected backup lamp bulbs for damage or open filament.
- Check the LH or RH backup lamp connectors to be sure the harness
connector seals are not damaged or missing.
Is the backup lamp bulb and connector OK?
| --
|
Go to Step 2
|
Go to Step
5
|
2
|
- Remove the inoperative backup lamp.
- Set the park brake.
- Shift the transaxle gear selector into REVERSE.
- Turn the ignition switch to the ON position.
- Connect a test light between inoperative backup lamp connector
terminal A and ground.
Is the test light on?
| --
|
Go to Step
3
|
Go to Step 4
|
3
|
| • | LH: Repair poor connection or open in circuit 250 between the
LH backup lamp harness connector terminal G and G401. |
| • | RH: Repair a poor connection or open in circuit 350 between the
RH backup lamp harness connector terminal G and G302. |
Is the repair complete?
| --
| Go to
Backup Lamp System Check
| --
|
4
| Repair poor connection or open in circuit 24 between the backup lamp
connector terminal A and S424.
Is the repair complete?
| --
| Go to
Backup Lamp System Check
| --
|
5
| Replace the damaged component.
Is the repair complete?
| --
| Go to
Backup Lamp System Check
| --
|
