Step | Action | Value(s) | Yes | No |
---|---|---|---|---|
1 |
Are the headlamp bulbs and connectors OK? | -- | ||
2 |
Is the test lamp on? | -- | ||
3 | Using a test lamp probe between the underhood accessory wiring junction block harness connector C3 terminal E1 and ground. Is the test lamp on? | -- | ||
4 | Repair a poor connection or open in circuit 1640 between the underhood accessory wiring junction block harness connector C3 terminal E1 and the LH headlamp harness connector C141 terminal F. Is the repair complete? | -- | Go to Headlight System Check | -- |
5 |
Is the test lamp on? | -- | ||
6 |
Is the test lamp on? | -- | ||
7 | Repair poor connection or open in circuit 1200 between the LH headlamp harness connector C141 terminal G and the underhood accessory wiring junction block harness connector C3 terminal D8. Is the repair complete? | -- | Go to Headlight System Check | -- |
8 | Replace the LH headlamp. Refer to Headlamp Replacement for service procedure. Is the repair complete? | -- | Go to Headlight System Check | -- |
9 | Check for poor connection at the underhood accessory wiring junction block. Is there a poor connection? | -- | ||
10 | Replace the damaged component. Is the repair complete? | -- | Go to Headlight System Check | -- |
11 | Replace the underhood accessory wiring junction block. Refer to Underhood Fuse Block Replacement for service procedure. Is the repair complete? | -- | Go to Headlight System Check | -- |