This bulletin provides late production and design change information ranging from wire gage and color changes to changing connector pinout identification and wiring routing changes.
The following information reflects current changes and revisions to Section 8A of the 1993 Oldsmobile Ninety Eight and Eighty Eight Electrical Systems/Service Manual Diagnostic Procedure:
Please mark reference to your service manual.
CARLINE: 1993 NINETY EIGHT/EIGHTY EIGHT --------------------------------------- Page(s) Revision ------- -------- 5E2-56 Add CKT 151 to "POSSIBLE CAUSES": - Open in CKT" list.
5E2-57 Change "REPAIR OPEN IN CKT 803," located in the lower right hand side of the page, to "REPAIR OPEN IN CKT 151 OR 803."
5E2-80 Delete the word "Gently" in step 3 of the Remove or Disconnect procedure for the Front Wheel Speed Sensors.
General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.