LOOSE AND/OR REDUCED RETENTION OF LEFT SIDE. Oldsmobile Cutlass Supreme 1995

SUBJECT: LOOSE AND/OR REDUCED RETENTION OF LEFT SIDE ACCESS COVER ON INSTRUMENT PANEL (APPLY HOOK AND LOOP MATERIAL)

MODELS: 1995-96 OLDSMOBILE CUTLASS SUPREME

CONDITION:

SOME OWNERS MAY COMMENT ABOUT THE LEFT SIDE ACCESS COVER ON THE INSTRUMENT PANEL BECOMING LOOSE AND/OR FALLING OFF.

CORRECTION:

REINSTALL THE COVER TO THE INSTRUMENT PANEL USING THE FOLLOWING MATERIALS AND PROCEDURE.

1. USING 3M #06480 HOOK AND LOOP MATERIAL (OR EQUIVALENT) CUT ONE PIECE APPROXIMATELY 25MM X 25MM (1" X 1") FROM EACH OF THE HOOK AND LOOP MATERIAL AND PRESS THE TWO PIECES TOGETHER.

2. REMOVE THE RELEASE PAPER FROM THE LOOP SIDE AND PRESS INTO POSITION ON THE INSIDE OF THE ACCESS COVER OPENING AS SHOWN IN THE ILLUSTRATION.

3. REMOVE THE RELEASE PAPER FROM THE HOOK SIDE AND REINSTALL THE ACCESS COVER TO THE INSTRUMENT PANEL.

4. PRESS THE COVER INTO POSITION TO ENSURE PROPER ADHESION.

WARRANTY INFORMATION:

FOR VEHICLES REPAIRED UNDER WARRANTY, USE:

LABOR OPERATION NUMBER DESCRIPTION LABOR TIME =============== =========== ==========

C2190 PANEL, ACCESS COVER - .2 HR REPLACE

FIGURES: 01 ATTACHMENTS: 00

FIGURE 1: LEFT END OF INSTRUMENT PANEL 1. FORWARD EDGE OF I/P 2. ACCESS HOLE 3. HOOK + LOOP LOCATION 4. NOTCH LOCATION ON COVER 5. I/P TRIM LINE

Object Number: 88978 Size: LF

GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.