DOOR LOCK/POWER WINDOW SWITCHES BINDING

SUBJECT: DOOR LOCK/POWER WINDOW SWITCHES BINDING (REMOVE MATERIAL)

MODELS: 1995 OLDSMOBILE CUTLASS SUPREME

CONDITION:

SOME OWNERS MAY COMMENT THAT THE POWER WINDOW AND/OR POWER LOCK SWITCHES DO NOT WORK.

CAUSE:

HOLES IN MOUNTING PLATE ARE TOO SMALL.

CORRECTION:

REMOVE 1MM OF MATERIAL FROM AROUND HOLES FOLLOWING PROCEDURE BELOW:

1. REMOVE SWITCH PLATE FROM DOOR TRIM ASSEMBLY AND SWITCHES FROM SWITCH PLATE. REFERENCE SERVICE MANUAL, SECTION 10-60.

2. REMOVE APPROXIMATELY 1MM (0.040") OF MATERIAL FROM BACK SIDE OF SWITCH PLATE AT THE THICKER LOCATIONS INDICATED IN ILLUSTRATION ATTACHED.

3. REINSTALL ALL PREVIOUSLY REMOVED PARTS.

WARRANTY INFORMATION:

FOR VEHICLES REPAIRED UNDER WARRANTY, USE: LABOR OPERATION: C3300 RIGHT SIDE, C3301 LEFT SIDE USE PUBLISHED LABOR OPERATION TIME. ADD: 0.1 HR. PER SWITCH PLATE

FIGURES: 0 ATTACHMENTS: 2

GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.

COPYRIGHT 1994 GENERAL MOTORS CORPORATION. ALL RIGHTS RESERVED.