This bulletin cancels and supercedes Dealer Technical Bulletin 91-T-02.
A new Spacer Plate (20) with a smaller 1-2 accumulator orifice which will reduce the potential for pedal buzz. This pedal buzz is noticeable at zero to light throttle in forward gear ranges caused by unstable operation of the 1-2 accumulator valve.
This new Spacer Plate will go into production in all "K" and "L" model HYDRA-MATIC 3T40 transaxles for the 1991 model year on July 30, 1990 (Julian Date 211).
To service any HYDRA-MATIC 3T40 for a pedal buzz condition, replace the (existing) spacer plate with a new spacer plate which contains the smaller 1-2 accumulator orifice.
Refer to the following part numbers whenever ordering this new spacer plate.
8678035 - KDC 8678489 - KKC 8678488 - KNC 8678038 - KXC (1991 Only) 8678163 - LJC 8678164 - LKC " " - LLC
Parts are currently available from GMSPO.
SERVICE MANUAL REFERENCE:
Whenever service to the Spacer Plate or valve body assembly is necessary, refer to the HYDRA-MATIC 3T40 Unit Repair Section of your service manual.
General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.