WIRE VISIBLE ON THE INSIDE REAR VIEW MIRROR (COVER P/N)

SUBJECT WIRE VISIBLE ON THE INSIDE REAR VIEW MIRRORS (INSTALL WIRING COVERS)

MODELS/YEARS 1990 CUTLASS SUPREME

CONDITION:

---------- Electrical wires to the lighted rear view mirror are visible when viewed from outside the vehicle.

CORRECTION:

-----------

To address this condition, install a new wire cover which is now available. Sedans: P/N 10165667 Coupes: P/N 10165666

Parts are currently available from GMSPO.

PROCEDURE:

1. Loosen the mirror attaching screw and remove the mirror from the windshield.

2. Position the new cover over the mirror base and snap in place with wiring inside the cover channel

3. Carefully insert the upper end of the cover under the front edge of the headliner.

4. Reinstall the mirror to the windshield and tighten the attaching screw.

5. Position the cover vertically from the mirror support to the headliner.

WARRANTY INFORMATION:

Labor Operation Number: T1649

Labor Time: 0.2 hour

Trouble Code: 92

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.