SERVICE MANUAL UPDATE WHEEL ALIGNMENT SPECIFICATION

SERVICE MANUAL UPDATE WHEEL ALIGNMENT SPECIFICATIONS (SECTION 3A, PAGE 8) NEW INFORMATION

1989 CUTLASS SUPREME

The rear alignment specification of toe has been changed. The new specification is:

Total Toe: 0 degrees plus or minus .3 degrees

This new specification should be used in place of the specification found in the chart on page 3A-8 of the 1989 Cutlass Supreme New Product Service Manual.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.