GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 1998 🢒 Cutlass 🢒 Body and Accessories 🢒 Cruise Control 🢒 Cruise Control Cable Replacement

Removal Procedure

    Object Number: 276343 Size: SH
  1. Disconnect the cruise control cable tab from the throttle body injection (TBI) cam (6). Rotate the TBI cam to ¼ open throttle in order to release the tab.

    2. Object Number: 276320 Size: SH
  2. In order to release the cable (4), push the locating fitting inward and pull the unit free from the throttle bracket (2).
  3. Remove the cable assembly (4) from the module (3) by turning the cable assembly ¼ turn counterclockwise.
  4. Remove the cable from the ribbon.

    5. Object Number: 276325 Size: SH
  5. Remove the cable (3) from the retaining clips (1).

Installation Procedure

    Object Number: 276325 Size: SH
  1. Install the cable (3) to the retaining clips (1).
  2. Install the cable to the ribbon.

    3. Object Number: 276320 Size: SH

    Important: Ensure that the ribbon does not become twisted when connecting the cable to the module.

  3. Connect the cable assembly (4) to the module (3) by turning the cable assembly ¼ turn clockwise.

    4. Object Number: 276343 Size: SH
  4. Install the cruise control cable tab (4) to the TBI cam (6).
  5. Align the cruise control cable fitting to the throttle body bracket (1). Snap the fitting into place. Ensure that the fitting is retained.
  6. Adjust the cruise control cable. Refer to Cruise Control Cable Adjustment .