GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 1998 🢒 Cutlass 🢒 Restraints 🢒 SIR 🢒 Remote Tape Player Replacement

Removal Installation

    Object Number: 444526 Size: SH
  1. Remove the accessory trim plate from the instrument panel. Refer to Instrument Panel Accessory Trim Plate Replacement in Instrument Panel, Gauges, and Console.
  2. Remove the nuts (2) from the tape player (1).

    3. Object Number: 444522 Size: SH
  3. Pull the tape player (2) from the instrument panel (1) in order to gain access to the electrical connector (3).
  4. Disconnect the electrical connector (3) from the tape player (2).
  5. Remove the tape player (2) from the instrument panel (1).

Installation Procedure

    Object Number: 444522 Size: SH
  1. Install the tape player (2) to the instrument panel (1).
  2. Connect the electrical connector (3) to the tape player (2).

    3. Object Number: 444526 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the nuts (2) to the tape player (2).

    4. Tighten
    Tighten the nuts to 3 N·m (27 lb in).

  4. Install the instrument panel accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement in Instrument Panel, Gauges, and Console.