Backfire
Checks
| Actions
|
Definition: Fuel
ignites in the intake manifold, or in the exhaust system, making loud
popping noise.
|
Preliminary Checks
|
• | Search for service bulletins. |
|
Fuel System
|
• | Check for contaminated fuel. Refer to Alcohol/Contaminants-in-Fuel Diagnosis
. |
• | Ensure each fuel injector harness is connected to the correct
injector/cylinder. Refer to
Engine Controls Schematics
Fuel Controls. |
|
Ignition System
|
• | Check for proper ignition voltage output with the J 36012-A
spark plug jumper wires and J 26792
spark tester or equivalent. |
• | Check the spark plugs for the following conditions: |
- | Check for wet or fuel fouled spark plugs. |
- | Check for cracks on the spark plugs. |
- | Check for improper spark plug gap. |
• | If the spark plugs are fuel or oil fouled, the cause of the fouling
must be determined before replacing the spark plugs. |
• | Check the Ignition Control Module (ICM) for proper ground connection. |
|
Engine Mechanical
|
• | Check the engine for the following mechanical conditions: |
- | Sticking or leaking valves. |
- | Worn camshaft(s) lobe(s). |
- | Excessive oil in combustion chamber-Leaking valve seals. |
- | Low cylinder compression. |
• | For incorrect basic engine parts. Inspect the following: |
• | Refer to Engine Mechanical. |
|
Additional Checks
|
• | Check Intake and exhaust manifold(s) for casting flash. Refer
to Engine Mechanical . |
• | Check the exhaust system for possible restriction. Check the following: |
- | Inspect exhaust system for damaged or collapsed pipes. |
- | Inspect mufflers for heat distress or possible internal failure. |
|