GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 1998 🢒 Cutlass 🢒 Engine 🢒 Engine Mechanical - 3.1L and 3.4L 🢒 Intake Manifold Removal

Intake Manifold Removal Upper VIN M


    Object Number: 187080 Size: SH
  1. Remove the spark plug wires.
  2. Remove the electronic ignition control module nuts and bolts.
  3. Remove the electronic ignition control module.

    4. Object Number: 187081 Size: SH
  4. Remove accelerator cable bracket bolts.
  5. Remove accelerator cable bracket.
  6. Disconnect the vacuum lines from the upper intake manifold.

    7. Object Number: 54360 Size: SH
  7. Remove the MAP sensor electrical connector.
  8. Remove the MAP sensor screws.
  9. Remove the MAP sensor.

    10. Object Number: 187076 Size: SH
  10. Remove the EGR valve pipe from the exhaust manifold.
  11. Remove the EGR valve bolts.
  12. Remove the EGR valve and gasket.
  13. Remove the EGR valve pipe and gasket.

    14. Object Number: 54358 Size: SH
  14. Remove the upper intake manifold studs and bolts.
  15. Remove the upper intake manifold.
  16. Remove the upper intake manifold gaskets.

Intake Manifold Removal Lower


    Object Number: 192688 Size: SH
  1. Remove the fuel feed and return pipe retaining clip nut.
  2. Remove the fuel feed and return pipe retaining clip.

    3. Object Number: 60768 Size: SH
  3. Remove the fuel injector rail bolts.
  4. Remove the fuel injector rail assembly.

    5. Object Number: 187060 Size: SH
  5. Remove the heater inlet pipe nut.
  6. Remove the heater inlet pipe.

    7. Object Number: 54281 Size: SH
  7. Remove the lower intake manifold bolts.
  8. Remove the lower intake manifold.