1

1. Place the ignition switch in the ON position.
2. Place the heater and the A/C controller mode switch in the OFF position.
3. Place the blower motor switch in the HI position.

Blower motor will not operate.

Blower Motor Always On

2

1. Place the heater and the A/C controller mode switch in the heat position.
2. Place the blower motor switch in the following positions:

•

LO

•

Medium 1

•

Medium 2

•

Medium 3

•

HI

Blower motor speed will increase from one position to the next.

* Refer to the appropriate symptom diagnostic table for the applicable abnormal result.