Radio Replacement w/o UM8

1. Remove the instrument panel center trim panel. Refer to Instrument Panel Center Trim Panel Replacement in Instrument Panel, Gages and Console.
2. Depress the spring clip retainers at the sides of the radio.
3. Pull the radio straight out to remove.

1. Position the radio into the opening in the instrument panel.
2. Push inward to engage the spring clips.
3. Ensure the spring clips are fully engaged.
4. Install the instrument panel center trim panel. Refer to Instrument Panel Center Trim Panel Replacement in Instrument Panel, Gages and Console.

Radio Replacement w UM8

1. Remove the instrument panel center trim panel. Refer to Instrument Panel Center Trim Panel Replacement in Instrument Panel, Gages and Console.
2. Depress the spring clip retainers at the sides of the receiver (2).
3. Pull the receiver (2) straight out to remove.
4. Disconnect the global positioning sensor antenna lead (1).

1. Connect the global positioning sensor antenna lead (1).
2. Install the receiver (2) into the instrument panel.
3. Ensure the spring clips are fully engaged.
4. Install the instrument panel center trim panel. Refer to Instrument Panel Center Trim Panel Replacement in Instrument Panel, Gages and Console.