For 1990-2009 cars only
Removal Procedure
- Remove the compartment lid trim. Refer to Rear Compartment Lid Inner Panel Trim Replacement .
- Remove the 5 fasteners that retain the applique to the rear compartment lid.
- Remove the applique from the vehicle.
Installation Procedure
- Install the applique to the rear compartment lid.
- Install the fasteners (1-5) in order to secure the applique to the rear compartment lid.
- Install the rear compartment lid trim. Refer to Rear Compartment Lid Inner Panel Trim Replacement .
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten the fasteners in the following order (3, 2, 4, 1, 5).
Tighten
Tighten the fasteners to 5 N·m (44 lb in).
