GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 2003 🢒 Aurora 🢒 Body and Accessories 🢒 Bumpers 🢒 Front Bumper Fascia Energy Absorber Replacement

Removal Procedure

    Object Number: 797058 Size: SH
  1. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement .
  2. Remove the screws (1) securing the energy absorber to the fascia, using a square drive bit.
  3. Remove the energy absorber from the fascia.

Installation Procedure

    Object Number: 797058 Size: SH
  1. Position the energy absorber to front bumper fascia.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the screws (1) to secure the energy absorber to the fascia using a square drive bit.

    3. Tighten
    Tighten the screws to 4 N·m (35 lb in).

  3. Install the front bumper fascia. Refer to Front Bumper Fascia Replacement .