GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 2003 🢒 Aurora 🢒 Body and Accessories 🢒 Lighting Systems 🢒 Instrument Panel Courtesy Lamp Bulb Replacement - Right Side

Removal Procedure

    Object Number: 105524 Size: SH
  1. Remove the fasteners (1) securing the right closeout insulator panel (3) to the instrument panel retainer.

    2. Object Number: 105525 Size: SH
  2. Lower the closeout insulator panel (3) in order to gain access to the courtesy lamp.
  3. Disconnect the electrical connector (1) from the courtesy lamp.
  4. Unclip the courtesy lamp from the closeout insulator panel (3).

Installation Procedure

    Object Number: 105525 Size: SH
  1. Position the courtesy lamp to the opening in the closeout insulator panel (3).
  2. Push inward on the courtesy lamp in order to engage the retaining clip.
  3. Connect the electrical connector  (1) to the courtesy lamp.

    4. Object Number: 105524 Size: SH
  4. Position the closeout insulator panel with the instrument panel retainer.

    5. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  5. Install the closeout insulator panel fasteners (1) in order to secure the panel to the retainer.

    6. Tighten
    Tighten the fasteners to 2 N·m (18 lb in).