GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Oldsmobile
🢒
1998
🢒
Aurora
🢒
Steering
🢒
Power Steering System
🢒 Power Steering Pump Pulley Replacement
Power Steering Pump Pulley Replacement Buick
Removal Procedure
Tools Required
J 25034-C
Pulley Remover
Remove the pump drive belts.
Remove the pump from the engine. Refer to
Power Steering Pump Replacement
.
Using the
J 25034-C
, remove the pulley from the pump.
Installation Procedure
Tools Required
J 25033-C
Pulley Installer
Using the
J 25033-C
, install the pulley onto the pump.
Set the axial tolerance of the pulley on the pump shaft at -0.25-0.25 mm (-0.010-0.010 in).
Install the pump to the engine. Refer to
Power Steering Pump Replacement
.
Install the pump drive belt.
Bleed the power steering system. Refer to
Power Steering System Bleeding
.
Inspect the system for leaks.
Power Steering Pump Pulley Replacement Oldsmobile
Removal Procedure
Tools Required
J 38825
Pulley Remover
Remove the pump drive belts.
Remove the pump from the engine. Refer to
Power Steering Pump Replacement
.
Using the
J 38825
, remove the pulley from the pump.
Installation Procedure
Tools Required
J 25033-C
Pulley Installer
Using the
J 25033-C
, install the pulley onto the pump.
Set the axial tolerance of the pulley on the pump shaft at -0.25-0.25 mm (-0.010-0.010 in).
Install the pump to the engine. Refer to
Power Steering Pump Replacement
.
Install the pump drive belt.
Bleed the power steering system. Refer to
Power Steering System Bleeding
.
Inspect the system for leaks.