Did you perform the Power Door Systems Diagnostic System Check?

--

Go to Step 2

Go to Diagnostic System Check - Power Door Systems

Verify that the RF power window is inoperative from the RF switch.

Do the power windows operate normally?

--

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

Go to Step 3

1. Access the right door lock and side window switch.
2. Turn the ignition switch to the RUN position.
3. Connect a digital multimeter (DMM) to CKT 1001 (DK GRN), terminal F at the right door lock and side window switch connector and ground.
4. Test for voltage. Refer to Circuit Testing in wiring systems.

Is ignition voltage present?

B+

Go to Step 5

Go to Step 4

Repair the open or the high resistance in CKT 1001 (DK GRN). Refer to Wiring Repairs in wiring systems.

Is the repair complete?

--

Go to Step 6

--

Replace the RH door lock and side window switch. refer to Front Side Door Window Switch Replacement .

Is the repair complete?

--

Go to Step 6

--

Operate the system in order to verify the repair.

Did you correct the condition?

--

System OK

Go to Step 3