• | J 41790-A Compressor Holding Tool |
• | J 42136 A/C Lip Seal Remover |
• | The inside of the compressor neck area surrounding the shaft |
• | The exposed portion of the compressor shaft seal |
• | The compressor shaft |
• | The O-ring groove |
Do not change a shaft seal because of small amounts of oil on an adjacent surface. Only replace a shaft seal after you find actual refrigerant leakage using an approved leak detector, such as J 39400 or equivalent.
• | J 39500-B R-134a A/C Refrigerant Recovery, Recycling and Recharging System (ACR4) |
• | J 5403 Snap Ring Pliers |
• | J 23128-A Seal Seat Remover and Installer |
• | J 9553-01 O-Ring Remover |
• | The inside of the compressor neck area surrounding the shaft |
• | The exposed portion of the seal |
• | The retainer ring groove |
• | The shaft |