GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 1998 🢒 S/T Isuzu - 2WD 🢒 Brakes 🢒 Hydraulic Brakes 🢒 Stop Lamp Switch Replacement

Removal Procedure
  1. Disconnect the battery negative cable. Refer to Battery Disconnect Caution in Cautions and Notices.

    2. Object Number: 883 Size: SH
  2. Disconnect the electrical connector from the stoplamp switch.

    3. Object Number: 202019 Size: SH
  3. Remove the pushrod retainer from the brake pedal pin.

    4. Object Number: 884 Size: SH
  4. Remove the stoplamp switch. Unsnap the switch from the pushrod.

Installation Procedure

    Object Number: 884 Size: SH
  1. Install the stoplamp switch on the pushrod. The switch will snap into place.

    2. Object Number: 202019 Size: SH
  2. Install the pushrod retainer on the brake pedal pin.

    3. Object Number: 883 Size: SH
  3. Install the electrical connector on the stoplamp switch.
  4. Connect the negative battery cable.