GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 4334  Size: SH

    Caution: Before servicing any electrical component, the ignition and start switch must be in the OFF or LOCK position and all electrical loads must be OFF, unless instructed otherwise in these procedures. If a tool or equipment could easily come in contact with a live exposed electrical terminal, also disconnect the negative battery cable. Failure to follow these precautions may cause personal injury and/or damage to the vehicle or its components.

  1. Disconnect the battery negative cable.
  2. Remove the transmission.
  3. Refer to Transmission Replacement in Transmission/Transaxle.

  4. Remove the clutch assembly, if equipped.
  5. Refer to Clutch in Transmission/Transaxle.

  6. Remove the flywheel.
  7. Refer to Engine Flywheel Removal .

  8. Clean and inspect the flywheel.
  9. Refer to Engine Flywheel Cleaning and Inspection .

Installation Procedure


    Object Number: 4334  Size: SH
  1. Install the flywheel.
  2. Refer to Engine Flywheel Installation .

  3. Install the clutch assembly, if equipped.
  4. Refer to Clutch in Transmission/Transaxle.

  5. Install the transmission.
  6. Refer to Transmission Replacement in Transmission/Transaxle.

  7. Connect the battery negative cable.